| 品牌 : | 雷冠 | 型号 : | YD437螺杆专用耐磨焊丝规格 |
| 牌号 : | YD437螺杆专用耐磨焊丝规格 | 产地 : | 上海 |
| 类型 : | 药芯 | 材质 : | 高铬 |
| 助焊剂含量 : | 2 | 加工定制 : | 是 |
| 焊丝直径 : | 1.2-4.0 | 熔点 : | 1300 |
| 长度 : | 1500mm | 重量 : | 15 |
| 用途 : | 用于电厂、锅炉、烤烟炉烟气脱硫设备等耐硫 | 工作温度 : | 200 |
| 焊接电流 : | 220 | 是否含助焊剂 : | 是 |
| 适用范围 : | 机械堆焊 | 焊芯直径 : | 1.6-4.0 |
| 高铬焊丝 : | 420 | 直径 : | 1.6-4.0 |
| 电流幅度 : | 50 | 硬度HRC : | 62-65 |
HB-YD114(Q) | 1.6 | 50-55 (受强烈冲击后 After high impact) | 高锰钢堆焊焊丝，受强烈冲击后，表面具有加工硬度的特点。 High-manganese steelhardfacing flux-cored wires, and applied to repair surface of high impact wear parts, cladding layer is impacted with work hardening. |
HB-YD115(Q) | 1.6 | 50-55 (受强烈冲击后After high impact) | 用于受严重冲击高锰钢堆焊，加工硬化效果显著。 Applied to repair surface of high impact wear parts, cladding layer is impacted with work hardening. |
HB-YD165(Q) | 1.6 | 60-65 | 高硬度耐磨焊丝，适用于磨粒磨损表面堆焊 High hardness wear-resistant wire, it is used to abrasive wearsurfacing welding. |
HB-YD172(Q) | 1.6 | ≥40 | 用于堆焊齿轮、挖泥斗、矿山机械等磨损件 Applied to repair surface of high impact wear parts, such as gear aud bucket and mining machinery. |
HB-YD207(Q) | 1.6 | ≥50 | 用于堆焊推土机刀片，螺旋桨等磨损零件 Applied to repair surface of high wear parts, such as bulldozer blade and propeller. |
HB-YD212(Q) | 1.2/1.6 | ≥50 | 用于堆焊各种受磨损的机件表面，如齿轮、挖斗、矿山机械 Applied to repair surface of wear parts, such as gear mud bucket and mining machinery. |
HB-YD256(Q) | 1.6 | HB≥170 | 高锰钢堆焊，适用于破碎机等受冲击磨损部位的堆焊 High-manganese steelhardfacing flux-cored Wires,it is applied to repair surface of high impact wear parts, such as Crusher. |
HB-YD258(Q) | 1.6 | 55-60 | 用于耐磨表面堆焊 Applied to repair surface of wear parts. |
HB-YD265(Q) | 1.6 | 60-65 | 高硬度耐磨焊丝，适用于磨粒磨损表面堆焊 High hardness wear-resistant wire, it is used to abrasive wearsurfacing welding. |
HB-YD322(Q) | 1.6 | ≥55 | 用于堆焊各种冲模及切削刃具，兼用于修复要求耐磨损性能较高之机械零件 Applied to repair surface ofhigh wear resistanceparts, such as die and cuttingcutlery. |
HB-YD114(Q) | 1.6 | 50-55 (受强烈冲击后 After high impact) | 高锰钢堆焊焊丝，受强烈冲击后，表面具有加工硬度的特点。 High-manganese steelhardfacing flux-cored wires, and applied to repair surface of high impact wear parts, cladding layer is impacted with work hardening. |
HB-YD115(Q) | 1.6 | 50-55 (受强烈冲击后After high impact) | 用于受严重冲击高锰钢堆焊，加工硬化效果显著。 Applied to repair surface of high impact wear parts, cladding layer is impacted with work hardening. |
HB-YD165(Q) | 1.6 | 60-65 | 高硬度耐磨焊丝，适用于磨粒磨损表面堆焊 High hardness wear-resistant wire, it is used to abrasive wearsurfacing welding. |
HB-YD172(Q) | 1.6 | ≥40 | 用于堆焊齿轮、挖泥斗、矿山机械等磨损件 Applied to repair surface of high impact wear parts, such as gear aud bucket and mining machinery. |
HB-YD207(Q) | 1.6 | ≥50 | 用于堆焊推土机刀片，螺旋桨等磨损零件 Applied to repair surface of high wear parts, such as bulldozer blade and propeller. |
HB-YD212(Q) | 1.2/1.6 | ≥50 | 用于堆焊各种受磨损的机件表面，如齿轮、挖斗、矿山机械 Applied to repair surface of wear parts, such as gear mud bucket and mining machinery. |
HB-YD256(Q) | 1.6 | HB≥170 | 高锰钢堆焊，适用于破碎机等受冲击磨损部位的堆焊 High-manganese steelhardfacing flux-cored Wires,it is applied to repair surface of high impact wear parts, such as Crusher. |
HB-YD258(Q) | 1.6 | 55-60 | 用于耐磨表面堆焊 Applied to repair surface of wear parts. |
HB-YD265(Q) | 1.6 | 60-65 | 高硬度耐磨焊丝，适用于磨粒磨损表面堆焊 High hardness wear-resistant wire, it is used to abrasive wearsurfacing welding. |
HB-YD322(Q) | 1.6 | ≥55 | 用于堆焊各种冲模及切削刃具，兼用于修复要求耐磨损性能较高之机械零件 Applied to repair surface ofhigh wear resistanceparts, such as die and cuttingcutlery. |
