| 动力 Power |
| 最大总功率Total power | Kw | 40 |
| 螺杆风机功率Fan power for screw | Kw | 0.14×3 |
| 挤出电机功率Extruder driving power | Kw | 22 |
| 油泵电机功率Oil pump power | Kw | 7.5 |
| 气源压力Air pressure | Mpa | 0.7 |
| 气源排量Air consumption | M³/min | 0.9 |
| 平均能耗Average energy consumption | KW/h | 23 |
| 挤出系统Extrusion unit |
| 螺杆直径Screw diameter | mm | 70 |
| 螺杆长径比 ScrewLDratio | L/D | 24 |
| 塑化能力Plasticizing capacity | Kg/hr | 90 |
| 螺杆加热段数Nnumber of heating zone | zone | 3 |
| 螺杆加热功率Extrusion heating power | KW | 7.5 |
| 模头加热功率Power of dieheating | KW | 2.5 |
| 挤出口最大直径Max die pin diameter | mm | 140 |
| 双模头中心距Center distance of double die | mm | 150/160 |
| 三模头中心距Center distance of tri die | mm | 110 |
| 四模头中心距Center distance of tetra die | mm | 80 |
