TC-1500-2S機械規格表 |
| 機械型號 Machine Type | Unit | TC-1500-2S | |
| 射 出 系 統 | 螺桿直徑 Screw Diameter | mm | ∮45 | ∮50 | |
| 射出壓力 Injection Pressure | kg/cm2 | 2056 | 1856 | |
| 理論射出容量 Theoretical Shot Volume | cm3 | 381 | 471 | |
| 射出量 (PS) Max Shot Veight(PS) | g | 337 | 420 | |
| oz | 11.8 | 14.8 | |
| 射出率 Injection Rate | cm3/sec | 113 | 141 | |
| 螺桿行程 Screw Stroke | mm | 240 | |
| 螺桿轉速 Screw Speed Max | rpm | 0-220 | |
| 射嘴接觸力 Nozzle Contact Force | tons | 4.2 | |
| 射嘴行程 Nozzle Retraction Stroke | mm | 300 | |
| 溫度控制段數 Number of Temperature Control | – | 4 | |
| 料斗容量 Material Hopper Capacity | L | 30 | |
| 鎖 模 系 統 | 鎖模力 Clamping Force | tons | 150 | |
| 開模力 Opeming Force | tons | 18 | |
| 模板尺寸 Platen Size | mm | 910*850 | |
| 柱內間距 Distance Between Tie Bare | mm | 650*620 | |
| **小模厚 Min Mold Height | mm | 250 | |
| 開模行程 Opening Stroke | mm | 300 | |
| **大開模距離 Mar Open Daylight | mm | 550 | |
| 頂出力量 Ejector Force | tons | 5.4 | |
| 頂出行程 Ejector Stroke | mm | 75 | |
| 滑模系統 | 滑模行程 Slide Stroke | mm | 750 | |
| **大模具重量 Mar Mold Weight | kg | 380 | |
| 滑模定位精度 Station Clearance | mm | ±0.02 | |
| 油 壓 電 力 系 統 | **大液壓壓力 Max Hydraulic Pressure | kg/cm2 | 140 | |
| 泵浦吐出量 Pump Output | liters/min | 118 | |
| 作動油量 Oil Reservoir Capacity | liters | 350 | |
| 冷卻水用量 Cooling Water Consumption | liters/hr | 1700-1900 | |
| 油壓馬達電力 Pump Motor Power | kw | 18.5 | |
| 電熱容量 Barrel Heating Power | kw | 10.5 | |
| 總用電量 Total Wattage | kw | 29 | |
| 其 他 | 機器重量 Machine Weight | tons | 7.2 | |
| 機器外型尺寸 Maching Dimensions | m | 2.52*1.2*3.8 | |
| 付船重量 Shipping Weight | tons | — | |
| 付船尺碼 Shipng Measurements | m | — | |
