生成海报
| LM-1450C *铣床参数表 | ||
| 工作台面积 table size | mm | 1600X320 |
| T型槽数X宽度X间距Numbers、width&distance between T - slot | mm | 3X18X70 |
| zui大纵向行程 Max.longitudinal travel | mm | 800 |
| zui大横向行程Max.cross travel | mm | 320 |
| zui大垂向行程 Max.vertical travel | mm | 350-400 |
| 滑枕行程 Travel of arm | mm | 730 |
| 立铣头zui大回转角度 Swivel angle of the vertical milling head | degree | ±360° |
| 工作台zui大回转角度Max.rotary angle of table | degree | ±45° |
| 立轴到立柱端面zui小距离Distance from vertical spindle to column surface (Min) | mm | 270 |
| 卧轴到滑枕结合面距离 Distabce from horizontal spindle to ram bottom | mm | 200 |
| 水平主轴锥度 Level spindle taper | taper | 7:24 NO50 |
| 铣头主轴锥度Milling head spindle taper | taper | 7:24 NO50 |
| 水平主轴转速级数 level spindle speed grade | steps | 18 |
| 水平主轴转速范围 level spindle speed range | rpm | 30-1500(50HZ) |
| 铣头主轴转速级数 Milling Head spindle speed garde | steps | 12 |
| 铣头主轴转速范围 milling head spindle speed range | rpm | 51-1483(50HZ) |
| 工作台进给级数Grade of the work-table feeds | steps | 18 |
| 纵横向、垂向进给速度范围Range of feed speeds longitudinal,cross,vertical | mm/min | 23.5-11808-394 |
| 纵横向、垂向快速移动速度Speed of rapid travels longitudinal,cross,vertical | mm/min | 2300/ 770 |
| 铣头主轴传动电机 Milling head spindle drive motor | kw | 4 |
| 水平主轴传动电机level spindle drive motor | kw | 7.5 |
| 进给电机功率Feed motor | kw | 1.5 |
| 冷却泵功率 Coolant pump | w | 125 |
| 机床净重 Net weight /Gross weight | kg | 3500/3700 |
| 机床外型尺寸（长X宽X高）Overall dimensions(L×W×H) | mm | 2300X2030X2000 |
滕州市三重机械制造有限公司，专业生产各种机床，钻铣床等
：
skype： live:
：
@
http:///
18221259202