生成海报
| 产品别名 | 啤机 |
|---|---|
| 产品用途 | 塑料制品加工五金包胶 |
| 螺杆直径 | 36（mm） |
| 螺杆转速 | 0--230（rpm） |
| 射胶量 | 130（g） |
| 合模力 | 8500（kN） |
| 开模行程 | 0到300（mm） |
| 售后服务 | 一年保修 |
| 种类 | 气动注塑机 |
| 品牌 | 昱泰天成 |
| 型号 | TC-YM |
| 型号MODEL | UNIT | TC-850-P | ||||
| 射出系统 INJECTION UNIT | 螺杆直径Screw Diameter | MM | 36 | 36 | ||
| 射出压力Maximum Injection Pressure | Kg/Cm2 | 2176 | 1722 | |||
| 理论射出容积Theoretical Shot Volume | Cm3 | 158 | 142 | |||
| 射出重量(PS)Maximum Shot Weight(PS) | G/oz | 141 | 130 | |||
| 射出理(PS)Safe Shot Weight(PS) | OZ | 5 | 4.6 | |||
| 射出率 Injection Rate | Cm3/sec | |||||
| 螺杆转速 Screw Speed | R/Min | |||||
| 螺杆行程Injection Rate | Mm | 155 | ||||
| 喷咀行程Nozzle Retraction Stroke | mm | 200 | ||||
| 温度控制段数Number of Tenperature Control | _ | 3 | ||||
| 锁模系统 CLAMPING UNIT | 锁模力Clamping Force | Ton | 85 | |||
| 上模板尺寸 Ton Platen Size | MM | |||||
| 下模板尺寸 Bottom Platen Size | MM | |||||
| 模柱间距 space Between Tie-Bere | mm | 520x320 | ||||
| 模板尺寸Platen Size | mm | 760x560 | ||||
| **小模厚Minimum Mold Thickness | MM | 180 | ||||
| 开模行程Opening Stroke | MM | 200 | ||||
| **大开模距离 Open Daylight | MM | 380/460 | ||||
| 顶出力 Ejetor Force | Ton | 2.7 | ||||
| 顶出行程 Ejetor Stoke | MM | 50 | ||||
| 油电力系统 ELE.UNIT | **大液压压力Max.Hydaulic presssure | Kg/cm2 | 140 | |||
| 冷却水用量Cooling Waer Consumption | I/h | 800-1000 | ||||
| 马达电力Pump Motor Power | Kw | 11.1(15HP) | ||||
| 电热容量Berrel Heation Power | kw | 6.7 | ||||
| 其他 OTHERS | 滑板尺寸 Sliding Table Size | MM | ||||
| 滑板行程 Sliding Table Stroke | MM | |||||
| 系统**大压力 Hydaulic System Presssure | Kg/Cm2 | |||||
| 油箱容量 Oil Tank Capatity | L | |||||
| 油泵电机 Pump/Motor Power | HP（Kw） | |||||
| 电热容量 Berrel Heation Power | Kw | |||||
| 总用电量Total wattage | Kw | |||||
| 机器尺寸Machine dimension(Approx.) | M | 2.2x1.5x4.1 | ||||
| 机器重量Machine Weight(Approx.) | Tons | |||||
| 机器总重Machine Weight | kg | 4300 | ||||
| 装箱重量Shipping Weight | Kg | 5000 | ||||
| 装箱尺寸Shipping Measurements(LxWxH) | M | 2.4x1.7x3.6 | ||||
| 规格如有更改，恕不另行通知。Specifications are subject to change without prior notice. | ||||||
18221259202